Wooden Camera has introduced a cradle for the Teradek Bolt LT TX that allows the transmitter to mount in-line with Gold or V-Mount camera-back power adding a total of less than 1 lbs. A selection of Gold Mount, V-Mount, or V-Mount to Gold Mount. V-Mount to Gold Mount can also adapt a camera-side V-Mount to a Gold Mount on-board battery. The rear (battery-side) battery plate features 3x D-Taps for accessory power at battery voltage (12-16V) and a digital fuse with reset button. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power to resume. The Teradek Bolt LT TX mounts into the cradle via one captive 1/4-20 at the bottom of the unit. The bottom of the unit features two openings – one for USB access and the other for airflow ventilation.  Available now at a retail price of US $449.  Please remember that Wooden Camera offers current DCS members a 10% discount, (contact DCS to verify your member status and get the discount code.)